Custom Pages

Tuesday, May 15, 2018

More Bookmarks

Here's a few more bookmarks I've made over the past couple of weeks:


I still have ideas for several others, and these patterns will be available as a bundle later in the year. Check back next week though, because I'll be having a sale on all of the other patterns in my Etsy shop. I'll probably start that around Wednesday, May 23rd and it will run until the 31st of May.

Tuesday, May 1, 2018

Inspired by Mary

These two bookmarks are inspired by Mary Konior's "Corn and Chaff," from her book Tatting in Lace.


Ever since tatting Corn and Chaff, I wondered how Mary was able to make these braid patterns. I finally figured out a way to do it, but find it easier to work with larger ring sets of three and four. It's basically a matter of balancing the curvature of the large ring, with the arch created at the base of a ring set. There's some trial and error in getting things to fit snugly.

Some interesting shapes can be made with these one shuttle patterns. Here's a version with pairs of rings:

Friday, April 20, 2018

Ready for Spring

I'm ready for the temperatures to stabilize so I can plant a vegetable garden in the back yard. The poor plants have been sitting inside under grow lights for months, as I wait for the freeze warnings to dissipate. In the meantime, I've tatted a flowery bookmark in bright spring colors:


This bookmark is made in Lizbeth size 40 thread, Coral Splash and Leaf Green Medium. The design is something I came up with earlier this week. As I was tatting this, I couldn't help but think that it is reminiscent of the Priscilla bookmark. The placement of elements is similar, however this pattern uses self closing mock rings while the Priscilla bookmark has regular rings. 

I have some other bookmark designs that I am working on as well. Between bookmarks and the table runner, I will be plenty busy with tatting for the rest of the year.

Wednesday, April 11, 2018

100 Trefoils

My table runner is up to 100 trefoils now. It's about 20% of the way finished:


In the photo below, you can see the end of the table runner in the bottom left corner. This will hang over the edge of the table. I'm tapering it to give it more visual interest. The tapering is hard to see right now, but will become clearer as I progress with the design.


Here's a view from further back to get an idea of how the project will sit on the table. As you can see, there's still a long way to go:


Earlier this week, I received my order of Liz Metallic thread. I got Rose, Raspberry Pink, Sea Foam, Silver, Sand Dollar, and Gold Dust:


I thought it would be fun to make a flowery bookmark with metallic thread, and that's why I bought the Raspberry Pink and Sea Foam. I'm still not sure what I will make with the other colors.

I also wanted to continue my thread size comparisons for the Liz Metallic. In my last blog post, I found that the Liz Metallic is noticeably larger than the size 20 Lizbeth. At the time, I didn't have any size 10 thread to compare it to. Well, a few days ago, I managed to find some size 10 Red Heart crochet thread while I was out shopping. I still don't own any size 10 Lizbeth, but am hoping that the size 10 Red Heart is close enough. Here's how the three samples stack up:


The Liz Metallic is right in between the size 20 Lizbeth and the size 10 Red Heart. I'd call the Liz Metallic a size 15, if such a thing exists? 

One final thing before I close out today's blog post. In my last blog post, a few of you said I should submit my color idea for the Liz Metallic thread. Here's an update on that. In response to my suggestion to add a black metallic to the available colors, I was told that Handy Hands is not taking any color suggestions for the Liz Metallic. I was reminded several times that the thread is a metallic (and not a cotton) and therefore they cannot make any color they want.

I also took the opportunity to ask if Handy Hands is planning to expand the metallics to a smaller thread size in the future. The answer to this is also no.

Friday, April 6, 2018

Liz Metallic samples

Yesterday, I finished tatting up the samples of Liz Metallic thread that Diane sent me. I wanted to try the more muted colors in the gold and silver range. Pictured below, top row: Iridescent, Sand Dollar, and Gold Dust. Bottom row: Silver and Frappe.


Here are my overall thoughts about the thread. Firstly, it sparkles a lot more in person than the photographs will show. However, it is slightly less bright and less sparkly than the Oren Bayan gold and silver thread I talked about in my previous post. This is only noticeable if you put the two samples side by side, and is not something I can capture very well in photos.

The Liz Metallic is a really strong thread. It's six cord, and thick. I cannot break it with my hands. (The Oren Bayan is only 3 cord, and I can break it with my hands, though I had no trouble with breakage when closing rings).

When compared with cotton threads, the metallic thread is stiffer and rougher. I tat a little more slowly to compensate for that. I tried five different colors, and four of them were easy to work with. The exception is the Iridescent color, pictured below:


The Iridescent thread looks and feels different than the other metallics. It's not as sparkly, and has more of a pearl look. As for feel? Well, I can only describe it as gummy or gluey. It doesn't have any residue or anything like that, but the thread gets stuck, especially when closing rings. There were a few times I didn't think I'd be able to close the ring and had to put a lot of force into it. Due to the difficulties, I cannot recommend this color for shuttle tatters. If you are a needle tatter, it might work because the stitches aren't as tightly wrapped onto the core thread.

All of the other colors tatted just fine. Rings were easy to close, and some of the metallics slid better than a cotton thread. For these, it's really up to what colors you prefer. I like Silver, pictured below:


I also like Sand Dollar (pictured next to Iridescent for accurate color representation):


Gold Dust is okay, but has a slight greenish undertone to it. I still ordered a ball of Gold Dust so I could finish my motif:


Frappe is a cross between silver and gold, and also has a slightly greenish undertone to it:


Lastly, I'd like to mention the size of the Liz Metallic thread. It is supposed to be comparable to a size 20. However, when I tatted a sample in Lizbeth size 20 white, I saw that it is not the case:


This star motif is from the doily on the cover of Jan Stawasz's Tatted Treasures. As you can see, there is a pretty noticeable size difference between the Lizbeth 20 white (above left) and the Liz Metallic Iridescent (above right). I don't have any size 10 thread to compare this to, but I would guess that the Liz Metallics are somewhere between a size 10 and a size 20. (Just for reference, the other Liz Metallic samples I tatted were exactly the same size as the Iridescent sample pictured above).

Overall, I found the Liz Metallics to be enjoyable to work with and a fun alternative to cotton thread. I ended up ordering six different colors and I'll have to figure out some small projects to make with them. I think this thread has a lot of potential. I'd love to see it in a smaller size in the future, as it might be more suitable for jewelry. I also think a black metallic would be interesting, though I don't know if they have any plans on expanding their color line.

If you have any questions about my experience with the Liz Metallic thread, feel free to ask in the comment section below.